How To Fix A Clipboard Spring

Ad Blocker Detected

Our website is made possible by displaying online advertisements to our visitors. Please consider supporting us by disabling your ad blocker.

Hey there, friend! So, picture this: you’re in the middle of an important project, and suddenly, your trusty clipboard decides to give you a hard time. The spring that holds your papers together just snapped! Yikes, right? Well, fear not because I’ve got your back. In this article, I’m going to walk you through How to fix a clipboard spring, just like I would if we were hanging out and chatting about it. So grab a cup of coffee, relax, and let’s get started!

First things first, let’s gather our tools. You’ll need a small screwdriver, a replacement spring (which you can find at any office supply store or online), and a bit of patience. Trust me, this fix is easier than you might think!

Step one: Remove the old spring. Take your screwdriver and locate the small screws on the clipboard. Carefully unscrew them, making sure to keep track of those little guys so they don’t disappear into the abyss. Once the screws are out, gently lift the top portion of the clipboard, revealing the broken spring.

Step two: Assess the situation. Take a moment to examine the broken spring and make note of its size and shape. This will help you find a suitable replacement later on.

Step three: Find a replacement spring. As I mentioned earlier, you can find replacement springs at most office supply stores or online. Measure the length and width of the broken spring, and try to find one that matches as closely as possible. If you’re unsure, it’s always helpful to bring the broken spring with you when you go shopping.

Step four: Install the new spring. Now comes the fun part! Take your replacement spring and align it with the broken one, making sure it fits snugly. Once you’re confident with the fit, carefully place it into the designated slot on the clipboard. Make sure the spring is properly aligned with the holes where the screws go.

Step five: Reassemble the clipboard. Gently place the top portion of the clipboard back on, ensuring that the spring stays in place. Grab those screws you saved earlier and carefully screw them back in, securing the top portion. Don’t overtighten though, as you don’t want to damage the clipboard.

And voila! You’ve successfully fixed your clipboard spring. Give yourself a pat on the back, my friend, you’re a DIY champ! Now, let’s tackle a few frequently asked questions that might pop up along the way.


1. Can I use any type of spring as a replacement?
While it’s Best to find a spring that closely matches the original one, you can experiment with different springs as long as they fit securely and provide the necessary tension to hold your papers in place.

2. Is fixing a clipboard spring a one-time fix or will it break again?
If you’ve followed the steps carefully and used a good-quality replacement spring, your fix should last for a good while. However, with repeated use, any spring can wear out over time, so keep an eye on it and be prepared to replace it again if needed.

3. Can I fix a clipboard spring without removing the screws?
While it’s technically possible to fix the spring without removing the screws, it’s much easier to access and replace the spring properly if you do remove them. Trust me, it’ll save you some frustration in the long run!

4. Can I fix a clipboard spring without any tools?
Ideally, you’ll want to have a small screwdriver on hand to remove and reattach the screws. However, if you’re in a pinch, you could try using a small coin or even a sturdy paperclip to unscrew the screws. Just be careful not to damage the clipboard in the process!

5. Is fixing a clipboard spring worth the effort or should I just buy a new clipboard?
If you’re sentimental about your clipboard or if it has some unique features that make it worth keeping, fixing the spring is definitely worth the effort. However, if you’re not particularly attached to it or if the clipboard is heavily damaged, it might be more practical to invest in a new one.

Now, let’s clear up a few common misconceptions about fixing a clipboard spring:


1. “I need to be a professional handyman to fix a clipboard spring.”
Absolutely not! Fixing a clipboard spring is a beginner-friendly DIY project that anyone can tackle. Just follow the steps, take your time, and you’ll have it fixed in no time.

2. “I have to buy an expensive replacement spring.”
Not at all! Replacement springs for clipboards are quite affordable and can be found at most office supply stores or online. You won’t have to break the bank to get your clipboard back in working order.

3. “I have to be super careful not to damage the clipboard.”
While it’s important to handle your clipboard with care, don’t stress too much about damaging it during the repair process. As long as you’re gentle and follow the instructions, your clipboard should come out unscathed.

4. “I’ll never be able to find a replacement spring that matches.”
While finding an exact match is ideal, it’s not always necessary. As long as you find a replacement spring that fits securely and provides sufficient tension, you’ll be good to go. Don’t worry too much about finding the perfect match.

So there you have it, my friend! You’re now armed with all the knowledge you need to fix a clipboard spring like a pro. Remember, take it easy, have fun, and enjoy the satisfaction of a successful DIY fix. Happy crafting!

How To Fix A Clipboard Spring

#Fix #Clipboard #Spring